AOC e1659Fwu monitor not working - support tool file attached

U1arunit · Messages: 44 Registration: 01.12.2003

The aforementioned monitor does not work with my new Win 8.1 laptop, despite installing/uninstalling/reinstalling drivers. Support tool file attached. Please advise, and thank you.

SR740il · Messages: 244 Registration: 10.04.2002

It looks like there are communication problems with the monitor, preventing our software updating the DisplayLink firmware to a version that will work with v7.6. This could be a hardware problem, but we're trying to reproduce internally first to see if there is a problem updating from the older version of firmware in your monitor. Wim

xing6666 · Messages: 831 Registration: 02.21.2002

Hi Wim, What have you learned since your last message? I must decide ASAP if I'll need to return this monitor as I require it for my work, but I'd like to have exhausted all options. Thank you. Renee

darkhart · Messages: 149 Registration: 12.05.2003

I would guess it is a hardware problem, otherwise there would be more similar reports. I would return the monitor for a replacement. Wim

fastfly · Messages: 648 Registration: 09.01.2003

I think we have discovered what the problem is. The older firmware in the display has problems with platforms on USB 3.0. This firmware was created before Haswell platforms were available. This was fixed a while ago, and once the firmware is updated, the panel should work correctly on Intel Haswell platforms. To get the firmware to update, it should be connected to a non Intel Haswell Windows PC, or connected using USB 2.0 (a USB 2.0 cable or through a USB hub). The display should then connect and the firmware updates. Once the firmware is updated, you can connect it back on USB 3.0 on Haswell and it should work correctly. Wim

///MINI · Messages: 5,983 Registration: 06.17.2001

same thing happening for me too

nightshocker · Messages: 166 Registration: 02.25.2002

how do i get the firmware to be updated? i'm getting the same problem, i suspect works fine on USB 2.0, but doesn't work on USB 3.0 Having a haswell proc, using DL 7.7.59032

NickC · Messages: 53 Registration: 10.19.2002

Hi, To update the firmware on your USB monitor you'll need to either: Install the latest DisplayLink software on another (non-Haswell) PC and then connect your USB monitor to that. Or Connect your USB monitor to your Haswell PC via a USB 2.0 cable After doing either one of these your USB monitor firmware will be upgraded and you will be able to connect to your USB monitor to your PC over USB 3.0. Thanks, James